Home » eShop » Heat Sinks » 40.0 x 38.0 x 10.0 mm BGA Heat Sink - High Performance Push Pin

*Image above is for illustration purpose only..	40.0 x 38.0 x 10.0 mm  BGA Heat Sink - High Performance Push Pin
	ATS Part#:	ATS-1038-C3-R0
	Description:	40.0 x 38.0 x 10.0 mm  BGA Heat Sink - High Performance Push Pin
	Component Specific:	N/A
	Heat Sink Type:	maxiFLOW
	Heat Sink Attachment:	PEM standoff with compression screws
	Installation Guide:	Recommended through hole size in PCB is 3.00 mm
	Thermal Performance:	See detail
	Mechanical Drawing:	See detail

• For larger heat sinks and higher pre-loads, push pins with compression springs are an effective mounting choice. The push pin has a flexible barb at the end that is designed to engage with a pre-drilled hole in a PWB. The compression spring adds the necessary force to hold the assembly together. Provides better thermal performance than comparable size straight fin and pin fin heat sinks.
• Features proven high performance maxiFLOW™ heat sink spread fin array to maximize cooling surfaces.
• Ideal for tight spaced components where wider heat sinks cannot be used
• Provided with pre-assembled thermal interface material centered on base.
• PEM Standoff with Compression Screws

Product Details

Part Number	Length (mm)	Width (mm)	Height (mm)	Fin Tip to Fin Tip (mm)	TIM	FINISH	Data Sheet	RoHS & REACH
ATS-1038-C3-R0	40.0	38.0	10.0	47.1	T766	Green Anodized

• Application
• Notes
• Thermal Performance
• Technical Data

Thermal Performance

Schematic Image	AIR VELOCITY		THERMAL RESISTANCE
	FT/MIN	M/S	°C/W Unducted Flow	°C/W Ducted Flow
*Image above is for illustration purpose only.	100	0.5	N/A	N/A
	200	1.0	N/A	0.0
	300	1.5	3.9	N/A
	400	2.0	N/A	N/A
	500	2.5	N/A	N/A
	600	3.0	N/A	N/A
	700	3.5	N/A	N/A
	800	4.0	N/A	N/A

• Length and width dimensions refer to the size of the component. Dimensions of the heat sink are subject to tolerances of up to .99 mm in order to accommodate the clip assembly
• Thermal performance data are provided for reference only. Actual performance may vary by application
• ATS reserves the right to update or change its products without notice to improve the design or performance
• Additional tooling fees may be required
• Typical lead time is a minimum of 4-6 weeks
• Contact ATS to learn about custom options available

ATS-1038-C3-R0 40.0 x 38.0 x 10.0 mm  BGA Heat Sink - High Performance Push Pin
ATS-1038-C3-R0 Mechanical Drawing - FUSED MODEL (used for Form and Fit use)
superGRIP™ Installation & Removal
superGRIP™ Clearance Guidelines
ATS-maxiGRIP Installation Guidelines
ATS-maxiGRIP Clearance Guidelines
RoHS Obtain RoHS Certificate

Order by Distributor:

Check
Distribution
Stock »