Get MechanicalDrawing ? *Image above is for illustration purpose only.. pushPIN™ Heat Sink ATS Part#: ATS-CPX025025015-166-C1-R0 Description: pushPIN™ Heat Sink, COARSE-PITCH, STRAIGHT, HOLE PATTERN:RIGHT-TABBED, NO TIM, BLUE ANODIZED Heat Sink Type: pushPIN™ Heat Sink Heat Sink Attachment: Push Pin ™ - Sold Separately Heat Sink Fin Pitch: COARSE-PITCH Heat Sink Fin Type: STRAIGHT Heat Sink Hole Pattern: RIGHT-TABBED Thermal Performance: See detail Mechanical Drawing: See detail Quick Attachment – Push pins feature a flexible barb at the end designed to engage with pre-drilled holes in a PWB. Compression Springs add the necessary force to hold the assembly together for secure attachment. Select from over 21 different springs to achieve precise force required. Push Pin Material available in brass or plastic in 10 sizes ranging from 9-20mm in length. Stainless steel hardware kit available for more secure attachment. Visit www.qats.com for available options. Heat Sinks Designed for All Airflow Conditions. Select from over 112 fine pitch HS designed for high velocity air flows and 98 course pitch HS designed for low velocity air flow conditions. Pre-assembled with phase-changing material for increased thermal performance. Double-sided thermal tape and no TIM options available to meet application-specific requirements. Lightweight, aluminum HS extruded from AL6063 provide optimal heat transfer with a blue anodized finish. All components are RoHS and REACH compliant. Industry standard hole pattern. Recommended through hole size is 3.175 mm Product Details Part Number Lifecycle Status Length (mm) Width (mm) Height (mm) E (mm) F (mm) Weight (gr) TIM FINISH Data Sheet RoHS & REACH ATS-CPX025025015-166-C1-R0 ACTIVE 25.0 25.0 15.0 30.0 30.0 8.0 NO TIM BLUE ANODIZED Application Notes Thermal Performance Technical & Mechanical Data Thermal Performance Schematic Image AIR VELOCITY THERMAL RESISTANCE FT/MIN M/S °C/W Unducted Flow °C/W Ducted Flow *Image above is for illustration purpose only. A: Length B: Width C: Height D : Fin Tip to Fin Tip. 100 0.5 12.1 8.2 200 1.0 8.2 6.1 300 1.5 6.8 5.2 400 2.0 5.9 4.6 500 2.5 5.3 4.2 600 3.0 4.9 3.8 700 3.5 4.6 3.6 ATS-CPX025025015-166-C1-R0 (Data Sheet) pushPIN™ Heat Sink, COARSE-PITCH, STRAIGHT, HOLE PATTERN:RIGHT-TABBED, NO TIM, BLUE ANODIZED ATS-CPX025025015-166-C1-R0 Mechanical Drawing - FUSED MODEL (used for Form and Fit use) Push Pin Heat Sink Attachment Datasheet Shows the different hardware kits including PEM, Brass, Plastic and Springs superGRIP™ Installation & Removal superGRIP™ Clearance Guidelines ATS-maxiGRIP Installation Guidelines ATS-maxiGRIP Clearance Guidelines RoHS Obtain RoHS Certificate Check Stock & Buy Now Push Pin Selection Tool: Click Here »
Get MechanicalDrawing ? *Image above is for illustration purpose only.. pushPIN™ Heat Sink ATS Part#: ATS-CPX025025015-166-C1-R0 Description: pushPIN™ Heat Sink, COARSE-PITCH, STRAIGHT, HOLE PATTERN:RIGHT-TABBED, NO TIM, BLUE ANODIZED Heat Sink Type: pushPIN™ Heat Sink Heat Sink Attachment: Push Pin ™ - Sold Separately Heat Sink Fin Pitch: COARSE-PITCH Heat Sink Fin Type: STRAIGHT Heat Sink Hole Pattern: RIGHT-TABBED Thermal Performance: See detail Mechanical Drawing: See detail Quick Attachment – Push pins feature a flexible barb at the end designed to engage with pre-drilled holes in a PWB. Compression Springs add the necessary force to hold the assembly together for secure attachment. Select from over 21 different springs to achieve precise force required. Push Pin Material available in brass or plastic in 10 sizes ranging from 9-20mm in length. Stainless steel hardware kit available for more secure attachment. Visit www.qats.com for available options. Heat Sinks Designed for All Airflow Conditions. Select from over 112 fine pitch HS designed for high velocity air flows and 98 course pitch HS designed for low velocity air flow conditions. Pre-assembled with phase-changing material for increased thermal performance. Double-sided thermal tape and no TIM options available to meet application-specific requirements. Lightweight, aluminum HS extruded from AL6063 provide optimal heat transfer with a blue anodized finish. All components are RoHS and REACH compliant. Industry standard hole pattern. Recommended through hole size is 3.175 mm Product Details Part Number Lifecycle Status Length (mm) Width (mm) Height (mm) E (mm) F (mm) Weight (gr) TIM FINISH Data Sheet RoHS & REACH ATS-CPX025025015-166-C1-R0 ACTIVE 25.0 25.0 15.0 30.0 30.0 8.0 NO TIM BLUE ANODIZED Application Notes Thermal Performance Technical & Mechanical Data Thermal Performance Schematic Image AIR VELOCITY THERMAL RESISTANCE FT/MIN M/S °C/W Unducted Flow °C/W Ducted Flow *Image above is for illustration purpose only. A: Length B: Width C: Height D : Fin Tip to Fin Tip. 100 0.5 12.1 8.2 200 1.0 8.2 6.1 300 1.5 6.8 5.2 400 2.0 5.9 4.6 500 2.5 5.3 4.2 600 3.0 4.9 3.8 700 3.5 4.6 3.6 ATS-CPX025025015-166-C1-R0 (Data Sheet) pushPIN™ Heat Sink, COARSE-PITCH, STRAIGHT, HOLE PATTERN:RIGHT-TABBED, NO TIM, BLUE ANODIZED ATS-CPX025025015-166-C1-R0 Mechanical Drawing - FUSED MODEL (used for Form and Fit use) Push Pin Heat Sink Attachment Datasheet Shows the different hardware kits including PEM, Brass, Plastic and Springs superGRIP™ Installation & Removal superGRIP™ Clearance Guidelines ATS-maxiGRIP Installation Guidelines ATS-maxiGRIP Clearance Guidelines RoHS Obtain RoHS Certificate
