Get MechanicalDrawing ? *Image above is for illustration purpose only.. 56.0 x 56.0 x 52.0 mm LGA Heat Sink LGA Cooling ATS Part#: ATS-57000-C1-R0 Description: 56.0 x 56.0 x 52.0 mm LGA Heat Sink LGA Cooling Component Specific: N/A Heat Sink Type: N/A Heat Sink Attachment: N/A Installation Guide: N/A Thermal Performance: See detail Mechanical Drawing: See detail Continuous air flow is provided by a Sayno Denki DC fan (included)Provides high capacity cooling for high power LGAsUnique attachment minimizes mechanical stress on the deviceIncludes spring-loaded, push pin mounts for direct attachment to the PCB Product Details Part Number Length (mm) Width (mm) Height (mm) Fin Tip to Fin Tip (mm) TIM FINISH Data Sheet RoHS & REACH ATS-57000-C1-R0 56.0 56.0 52.0 N/A NO TIM BLACK-ANODIZED Application Notes Thermal Performance Technical Data Thermal Performance Schematic Image AIR VELOCITY THERMAL RESISTANCE FT/MIN M/S °C/W Unducted Flow °C/W Ducted Flow *Image above is for illustration purpose only. A: Length B: Width C: Height D : Fin Tip to Fin Tip 100 0.5 N/A N/A 200 1.0 0.0 0.5 300 1.5 N/A N/A 400 2.0 N/A N/A 500 2.5 N/A N/A 600 3.0 N/A N/A 700 3.5 N/A N/A 800 4.0 N/A N/A Length and width dimensions refer to the size of the component. Dimensions of the heat sink are subject to tolerances of up to .99 mm in order to accommodate the clip assembly Thermal performance data are provided for reference only. Actual performance may vary by application ATS reserves the right to update or change its products without notice to improve the design or performance Additional tooling fees may be required Typical lead time is a minimum of 4-6 weeks Contact ATS to learn about custom options available ATS-57000-C1-R0 56.0 x 56.0 x 52.0 mm LGA Heat Sink LGA Cooling ATS-57000-C1-R0 Mechanical Drawing - FUSED MODEL (used for Form and Fit use) superGRIP™ Installation & Removal superGRIP™ Clearance Guidelines ATS-maxiGRIP Installation Guidelines ATS-maxiGRIP Clearance Guidelines RoHS Obtain RoHS Certificate Order by Distributor: Check Distribution Stock »
Get MechanicalDrawing ? *Image above is for illustration purpose only.. 56.0 x 56.0 x 52.0 mm LGA Heat Sink LGA Cooling ATS Part#: ATS-57000-C1-R0 Description: 56.0 x 56.0 x 52.0 mm LGA Heat Sink LGA Cooling Component Specific: N/A Heat Sink Type: N/A Heat Sink Attachment: N/A Installation Guide: N/A Thermal Performance: See detail Mechanical Drawing: See detail Continuous air flow is provided by a Sayno Denki DC fan (included)Provides high capacity cooling for high power LGAsUnique attachment minimizes mechanical stress on the deviceIncludes spring-loaded, push pin mounts for direct attachment to the PCB Product Details Part Number Length (mm) Width (mm) Height (mm) Fin Tip to Fin Tip (mm) TIM FINISH Data Sheet RoHS & REACH ATS-57000-C1-R0 56.0 56.0 52.0 N/A NO TIM BLACK-ANODIZED Application Notes Thermal Performance Technical Data Thermal Performance Schematic Image AIR VELOCITY THERMAL RESISTANCE FT/MIN M/S °C/W Unducted Flow °C/W Ducted Flow *Image above is for illustration purpose only. A: Length B: Width C: Height D : Fin Tip to Fin Tip 100 0.5 N/A N/A 200 1.0 0.0 0.5 300 1.5 N/A N/A 400 2.0 N/A N/A 500 2.5 N/A N/A 600 3.0 N/A N/A 700 3.5 N/A N/A 800 4.0 N/A N/A Length and width dimensions refer to the size of the component. Dimensions of the heat sink are subject to tolerances of up to .99 mm in order to accommodate the clip assembly Thermal performance data are provided for reference only. Actual performance may vary by application ATS reserves the right to update or change its products without notice to improve the design or performance Additional tooling fees may be required Typical lead time is a minimum of 4-6 weeks Contact ATS to learn about custom options available ATS-57000-C1-R0 56.0 x 56.0 x 52.0 mm LGA Heat Sink LGA Cooling ATS-57000-C1-R0 Mechanical Drawing - FUSED MODEL (used for Form and Fit use) superGRIP™ Installation & Removal superGRIP™ Clearance Guidelines ATS-maxiGRIP Installation Guidelines ATS-maxiGRIP Clearance Guidelines RoHS Obtain RoHS Certificate