Advanced Thermal Solutions ATS-X53190P-C1-R0 Straight Fin Heat Sink with superGRIP attachment has 24.3 C/W Thermal Resistance at 200LFM. Probably one of the best things about this heat sink “system” is the fact that you can use phase change thermal interface material (TIM) with it. Phase change TIM, under the right amount of pressure, can improve your thermal performance from 10% to 20% in a given application.
Speaking of thermal interface material for heat sinks, Jeff McCutcheon, senior technical specialist at 3M, has written a very good article and resources on choosing TIM. You can get a copy at EP&T Magazine: Higher frequencies leading to rising power and EMI in traditionally low power electronic devices
To see a video demo of ATS’s heat sink clip, superGRIP, see below:
[youtube=http://www.youtube.com/watch?v=0MqyNReoo10]
For more information, talk to one of our application engineers or to purchase you may contact us at T: 781-769-2800, email us at sales.hq@qats.com or visit our web site at http://www.qats.com
The ATS ATSEU-077D-C4-R0 Star LED heat sink is made from light weight aluminum in a cylindrical shape that fits common LED lamp applications. The heat sink’s fins are arrayed in a round, star-like cross section that optimizes thermal performance through radiative cooling to the local air flow. The ATSEU-077D-C4-R0 has a power dissipation of 3W. A flat surface at one end of the heat sink provides a base for direct mounting of LEDs. All heat sinks within the series are RoHS compliant. To learn more as well as how to purchase please visit our site at this link: 
ATS’ HP-97 Series are high-power component simulators used for replicating the heat dissipation conditions of devices. It features a 32 x 32 mm Aluminum block and a cartridge heater embedded within a high temperature DERLIN® housing and mounted to an FR4 plate. DERLIN® is known for its stiffness, dimensional stability, impact resistance, and structural strength. To learn more as well as how to purchase please visit our site at this link: 
The HP 1000-SP hand held temperature sensor is used to find the temperature of air or of solids. It is designed to be positioned by hand in tight or awkward spaces where a standard sensor would be impractical. It can also be used as part of an ATS eATVS-4 and laptop to create a mobile thermal measurement system. To learn more as well as how to purchase please visit our site at this link: 
The ATS-X50350B-C1-R0 series maxiFLOW heat sink with superGRIP heat sink clip from Advanced Thermal Solutions (ATS) provides high levels of cooling performance for applications with low to moderate airflo. To learn more as well as how to purchase please visit our site at this link: