Learn about how vapor chambers can be a key part of your thermal management solutions in this article. And learn about ATS’ off the shelf vapor chambers.
The ATS family of Aluminum vapor chambers are the largest and broadest set of off the shelf vapor chambers available today. From 25x25mm (1x1in) to 250x250mm (9.8×9.8in). Made in the USA, the vapor chambers are also available in Copper and Titanium.
==> See our entire line of Aluminum Vapor Chambers, off the shelf, at ATS’s web site: https://www.qats.com/Consulting/Heat-Pipe-and-Vapor-Chamber-Design
What are vapor chambers?
Vapor chambers, available in different metal types, use both boiling and condensation to maximize their heat transfer ability. They feature a solid metal enclosure with a wick structure lining the inside walls. The inside of the enclosure is saturated with a working fluid at reduced pressure. As heat is applied at one side of the vapor chamber, the fluid near the heat source reaches its boiling temperature and vaporizes. The vapor then travels to the other side of the vapor chamber and condenses into liquid. The condensed fluid returns to the hot side via the gravity or capillary action, ready to vaporize again and repeat the cycle. Heat sinks with embedded vapor chamber are lighter than solid metal heat sinks, which can make them more suitable for applications which are weight sensitive. you can learn about vapor chambers at the many articles on our blog at this link:https://www.qats.com/cms/category/vapor-chamber/
==> Our free engineering eBook “Vapor Chambers and Their Roles in Thermal Management of Electronics” can be downloaded here from ATS’ web site https://www.qats.com/cms/engineering-ebook-vapor-chambers/