Check Stock & Buy Now Data Sheet Frequently Asked Questions ? Request a Quote More Links Webinar: How to Properly Measure Air Velocity Related Qpedia Articles Sensors for Temperature Measurement Air Flow Measurement in Electronic Systems Thermocouples: What They Are & How They Work Understanding Hot Wire Anemometry Download Portal Hand-Held Surface Probe HP 1000-SP The HP 1000-SP is a stainless steel, single-sensor hand-held probe designed for measuring the surface temperature of solids. Its pointed tip allows for exact positioning of the sensor on the desired spot. This enhances measurement accuracy by eliminating any conduction heat transfer that may occur through the stem. Product Specifications Length: 150 mm (16") Diameter: 4.3 mm (0.2") Temperature Range: -20 to 120ºC (-4 to 248ºF) Temperature Accuracy: +/- 1ºC Applications Component Testing Heat Sink Characterization Heat Sink Comparison PCB Testing Thermal Characterization Studies Air flow studies for automotiveHVAC air flow CharacterizationMedical equipment air flow validation Additional Features Highly Accurate Temperature Measurement Compatible with most ATS instruments, including the iQ-200, ATVS-2020, ATVS-NxT, eATVS, ISD & WTC-100 Product and How To Videos The families of ATS thermal test instruments for the electronics industry. Instrument Product Family HP-97™ Power module for simulating heat-dissipating components ATVS-NxT™ Hot wire anemometer with touch screen PC & up to 32 channels for measuring temperature & velocity ATVS-2020™ Hot wire anemometer with up to 32 channels for measuring temperature & velocity eATVS-8™ Hot wire anemometer with 4 or 8 channels for measuring temperature & velocity HFC-100™ A system for controlling and measuring heat flux up to 1,000 w/cm2 ISD™ Analog hot wire anemometer board for measuring temperature and velocity tvLYT™ High-resolution liquid crystal thermography system for cost-effective temperature measurement PTM-1000™ A transducer for measuring static & differential pressure with 4 to 8 channels CIP-1000™ A controllable isothermal plate system for components & PCB testing TLC-100™ Thermochromic liquid crystal kit for heat mapping studies FCM-100™ Fan characterization module for generating PQ curve for a single fan or fan tray thermVIEW™ High-resolution thermography system with precise temperature accuracy iQ-200™ A single system for A single system for measuring temperature. velocity & pressure measuring temperature. velocity & pressure iFLOW-200™ An automatic system for cold plate characterization DAC-200™ Instrument for outputting analog voltage linearly proportional to air velocity and temperature. FSC-200™ Fan speed controller for automation of thermal testing Portable Anemometer Portable vane anemometer for measuring air flow speed & volumetric flow rate iQx-100™ A single system for measuring temperature velocity, pressure & humidity Closed Loop Wind Tunnels Thermally characterize components, boards and heat sinks undera range of air flows and temperature. Open Loop Wind Tunnels Thermally characterize components, boards and heat sinks undera range of air flows.
