Tubed Cold Plates
Products
Heat Sinks
Wind Tunnels
Instruments
Sensors
VOSTOK Freezers
Vortx Air Cleansers
Heat Pipes & Vapor Chambers
Liquid Cooling
TEC

Tubed Cold Plates

Tubed Cold Plates

Cold Plates for Low to Moderate Heat Loads

Check Distribution Stock
Related Qpedia Articles
The Tubed Cold Plate family is engineered as a cost effective and reliable solution for thermal management applications where liquid cooling of components is preferred over air. The cold plates are manufactured in the USA using a continuous copper tube and a press fit attachment. This method maximizes heat transfer since the tubes are directly connected to the plate instead of through a bulky epoxy or other material that can act as thermal insulator.


Cold Plate Features & Benefits

  • Cost effective thermal management solution for component cooling where the heat load is low to moderate
  • Compatible with industry accepted coolants
  • The cold plate base the copper tubes press into is made of aluminum 6063
  • Copper tubed cold plates are attached to the base plate with a thin film of high thermal conductivity epoxy for secure tube attachment.
  • Stainless steel tubed cold plates are SS 304/316 and feature tubing secured between two plates
  • Supplied with secure, 3/8“ push-to-connect tube fittings for a tight connection between the cold plate and inlet and outlet tubing. Tube outer diameter is 3/8“ (9.525 mm).
  • Maximum pressure: 200 psi
  • Plastic tubing connecting to our Cold Plate fitting has to be at least 90 durometer Shore A scale

Cold Plate Applications

  • Automotive
  • Instruments
  • Uninterruptible Power Supplies
  • Wind Turbines
  • Photovoltaic Inverters
  • Induction Heaters
  • Motor Devices
  • High Powered Industrial Lasers
  • Battery Cooling
  • Many high-power, high-heat
  • flux applications
dP=Pressure Drop;
 
Part NumberPlate Dimension (mm)Overall
Length
(mm)
# of
Tube
Passes
Tube
Material
Flow Rate 0.5 gpmFlow Rate 1.0 gpmFlow Rate 1.5 gpmFlow Rate 2.0 gpm
LWHR
(°C/W)
dP
kPA/(psi)
R
(°C/W)
dP
kPA/(psi)
R
(°C/W)
dP
kPA/(psi)
R
(°C/W)
dP
kPA/(psi)
ATS-TCP-1000 57 57 15 133 2 Copper 0.088 1.03 (0.15) 0.075 3.24 (0.47) 0.067 6.55 (0.95) 0.063 11.1 (1.61)
Check
Distribution Stock »
ATS-TCP-1001 152 127 15 229 4 Copper 0.021 3.58 (0.52) 0.016 10.82 (1.57) 0.013 21.16 (3.07) 0.012 35.16 (5.1)
Check
Distribution Stock »
ATS-TCP-1002 305 127 15 381 4 Copper 0.013 5.51 (0.8) 0.009 15.58 (2.26) 0.008 32.19 (4.67) 0.007 54.26 (7.87)
Check
Distribution Stock »
ATS-TCP-1003 152 178 15 241 6 Copper 0.015 5.58 (0.81) 0.011 15.99 (2.32) 0.009 32.06 (4.65) 0.008 53.92 (7.82)
Check
Distribution Stock »
ATS-TCP-1004 305 178 15 393 6 Copper 0.011 6.62 (0.96) 0.006 22.2 (3.22) 0.005 45.9 (6.66) 0.004 77.56 (11.25)
Check
Distribution Stock »
ATS-TCP-1005 610 178 15 698 6 Copper 0.007 12.27 (1.78) 0.004 41.3 (5.99) 0.003 85.98 (12.47) 0.003 143.2 (20.77)
Check
Distribution Stock »
ATS-TCP-1018 57 57 15 133 2 Stainless Steel 0.159 0.675 (0.1) 0.144 1.65 (0.24) 0.135 3.01 (0.44) 0.127 4.75 (0.69)
Check
Distribution Stock »
ATS-TCP-1019 152 127 15 229 4 Stainless Steel 0.031 2.39 (0.35) 0.027 6.17 (0.89) 0.024 11.9 (1.73) 0.024 19.47 (2.82)
Check
Distribution Stock »
ATS-TCP-1020 305 127 15 381 4 Stainless Steel 0.018 3.77 (0.55) 0.015 9.39 (1.36) 0.014 18.56 (2.69) 0.013 30.02 (4.35)
Check
Distribution Stock »
ATS-TCP-1021 152 191 15 229 6 Stainless Steel 0.021 3.57 (0.52) 0.018 9.22 (1.34) 0.017 18.33 (2.66) 0.016 29.33 (4.25)
Check
Distribution Stock »
ATS-TCP-1022 305 191 15 381 6 Stainless Steel 0.013 5.64 (0.82) 0.01 14.49 (2.1) 0.009 27.99 (4.06) 0.009 46.54 (6.75)
Check
Distribution Stock »
ATS-TCP-1023 610 191 15 686 6 Stainless Steel 0.008 8.14 (1.18) 0.006 25.11 (3.64) 0.005 51.64 (7.49) 0.004 88.69 (12.86)
Check
Distribution Stock »
  • Sort Ascending
  • Sort Descending
  • Clear Sorting
  • Columns

Complete Your Liquid Loop with ATS

ATS has the products needed to design a complete liquid cooling loop : Cold Plates to transfer and remove the heat from the source; Heat Exchanger to tranfer heat from the liquid to the air with or without a fan; and Chillers to circulate and condition the fluid in the system. In Addition , ATS offer Flow Meter to instanteaously measure the volumetric flow rate of the fluid in the system and Leak Detector to notify users of any leaks in the system.


Flow Meters

Leak Detectors

Chillers

Heat Exchangers