Get Mechanical Drawing ? *Image above is for illustration purpose only.. ATS Part#: ATS-TCP-1022 Description: 6 Pass Stainless Steel Tubed Cold Plates Base Material: Aluminum Tubing: Stainless Steel Thermal Performance: See detail Mechanical Drawing: See detail RoHS & REACH Certificate Fused Model Check Distribution Stock Frequently Asked Questions ? Cost effective thermal management solution for component cooling where the heat load is low to moderate Compatible with industry accepted coolants The cold plate base the copper tubes press into is made of aluminum 6063 Copper tubed cold plates are attached to the base plate with a thin film of high thermal conductivity epoxy for secure tube attachment. Stainless steel tubed cold plates are SS 304/316 and feature tubing secured between two plates Supplied with secure, 3/8“ push-to-connect tube fittings for a tight connection between the cold plate and inlet and outlet tubing. Tube outer diameter is 3/8“ (9.525 mm). Maximum pressure: 200 psi Plastic tubing connecting to our Cold Plate fitting has to be at least 90 durometer Shore A scale Part Number Plate Dimension (mm) OverallLength(mm) # No of Tube Pass TubeMaterial Flow Rate 0.5 gpm Flow Rate 1.0 gpm Flow Rate 1.5 gpm Flow Rate 2.0 gpm Data Sheet RoHS & REACH Length Width Height R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) ATS-TCP-1022 305.0 191.0 15.0 381 6 Stainless Steel 0.013 5.64 (0.82) 0.01 14.49 (2.10) 0.009 27.99 (4.06) 0.009 46.54 (6.75) Application Notes Thermal Performance Technical Data Thermal Performance Schematic Image Cold Plate Thermal Resistanc Flow Rate (gpm) R (°C/W) dP kPA (psi) *Image above is for illustration purpose only. 0.5 0.013 5.64 (0.82) 1.0 0.01 14.49 (2.10) 1.5 0.009 27.99 (4.06) 2.0 0.009 46.54 (6.75) ATS-TCP-1022 ATS-TCP-1022 Mechanical Drawing - FUSED MODEL (used for Form and Fit use) RoHS Obtain RoHS Certificate
Get Mechanical Drawing ? *Image above is for illustration purpose only.. ATS Part#: ATS-TCP-1022 Description: 6 Pass Stainless Steel Tubed Cold Plates Base Material: Aluminum Tubing: Stainless Steel Thermal Performance: See detail Mechanical Drawing: See detail