*Image above is for illustration purpose only.. ATS-PHEX-102 Compact Heat Exchangers ATS picoHEX™ heat exchangers add high performance cooling to small form factor applications where traditional size exchangers will not fit. Their compact design is built on the ATS family of UltraCool CPU coolers, and their cooling properties are consistent with ATS’ wide line of exchangers. picoHEX™ heat exchangers can be used for cooling CPUs, GPUs, FPGAs and other high power components.The tube-to-fin, liquid-to-air design of picoHEX™ compact heat exchangers includes the industry’s highest density fins. This feature maximizes heat transfer from liquid to air, allowing the liquid to be cooled to lower temperatures than other heat exchangers on the market. The fins and tubes are made of copper and stainless steel and can be used with a wide variety of fluids, including water, dielectric fluids and custom designed heat transfer fluids. Check Stock & Buy Now Features & Benefits Tube diameter: 6.35 mm (0.25”) Copper tubes Copper fins ATS special high-efficiency and high density fin design Silver-solder brazed jointsInternally cleaned and corrosion protected Externally coated for corrosion protection Can be customized for different fans or blowers 100% pressure tested Maximum pressure: 100 psi Applications CPU, GPU, FPGA CoolingLaser CoolingMedical Diagnostic EquipElectronics CoolingImaging EquipmentCompressor CoolingSemiconductor ProcessingHVAC2U, 3U Servers & ChassisFood & Beverage ProcessingBotanical ExtractionIndustrial Equipment Product Details L=Length (inches);W=Width (inches); H=Height (inches);W=Weight w/fan (g);T=Thickness (mm); R=Thermal Resistance (°C/W); ΔT=Inlet liquid temperature - Inlet air temperature; Part Number Lifecycle Status Dimension (inches) Fan Voltage (VDC) # No of Fans Heat Transfer Capacity Weight (g) Material Length Width Height ATS-PHEX-102 ACTIVE 3.5 3.5 1.1 12 1 upto 5W per ΔT=1°C 744 Copper tubes, Copper fins Complete Your Liquid Loop with ATS ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system. iCDM Cold Plates Vapor Compression Chillers Heat Exchangers TEC Heat and Chillers Flow Meters Leak Detectors Refrigeration Liquid Cooled Heat Sinks Schemantic Image Fused Model Data Sheet RoHS & REACH Certificate Custom Designs Available! Click Here to Contact Us Frequently Asked Questions ? Download Portal View Similar ATS-HE-23 ATS-HE20-C1-R0
*Image above is for illustration purpose only.. ATS-PHEX-102 Compact Heat Exchangers ATS picoHEX™ heat exchangers add high performance cooling to small form factor applications where traditional size exchangers will not fit. Their compact design is built on the ATS family of UltraCool CPU coolers, and their cooling properties are consistent with ATS’ wide line of exchangers. picoHEX™ heat exchangers can be used for cooling CPUs, GPUs, FPGAs and other high power components.The tube-to-fin, liquid-to-air design of picoHEX™ compact heat exchangers includes the industry’s highest density fins. This feature maximizes heat transfer from liquid to air, allowing the liquid to be cooled to lower temperatures than other heat exchangers on the market. The fins and tubes are made of copper and stainless steel and can be used with a wide variety of fluids, including water, dielectric fluids and custom designed heat transfer fluids. Check Stock & Buy Now Features & Benefits Tube diameter: 6.35 mm (0.25”) Copper tubes Copper fins ATS special high-efficiency and high density fin design Silver-solder brazed jointsInternally cleaned and corrosion protected Externally coated for corrosion protection Can be customized for different fans or blowers 100% pressure tested Maximum pressure: 100 psi Applications CPU, GPU, FPGA CoolingLaser CoolingMedical Diagnostic EquipElectronics CoolingImaging EquipmentCompressor CoolingSemiconductor ProcessingHVAC2U, 3U Servers & ChassisFood & Beverage ProcessingBotanical ExtractionIndustrial Equipment Product Details L=Length (inches);W=Width (inches); H=Height (inches);W=Weight w/fan (g);T=Thickness (mm); R=Thermal Resistance (°C/W); ΔT=Inlet liquid temperature - Inlet air temperature; Part Number Lifecycle Status Dimension (inches) Fan Voltage (VDC) # No of Fans Heat Transfer Capacity Weight (g) Material Length Width Height ATS-PHEX-102 ACTIVE 3.5 3.5 1.1 12 1 upto 5W per ΔT=1°C 744 Copper tubes, Copper fins Complete Your Liquid Loop with ATS ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system. iCDM Cold Plates Vapor Compression Chillers Heat Exchangers TEC Heat and Chillers Flow Meters Leak Detectors Refrigeration Liquid Cooled Heat Sinks
Schemantic Image Fused Model Data Sheet RoHS & REACH Certificate Custom Designs Available! Click Here to Contact Us Frequently Asked Questions ? Download Portal View Similar ATS-HE-23 ATS-HE20-C1-R0