Get Mechanical Drawing *Image above is for illustration purpose only.. ATS-LQHS-84025-C1-R0 Liquid Cooled Heat Sinks ATS Part#: ATS-LQHS-84025-C1-R0 Description: 84.00 x 84.00 Heat Sink in heights of 25.8mm High Performance Liquid Cooled fanSINK™ with Push Pin Attachment Heat Sink Type: fanSINK, liquid cooled, (fan not included) Installation Guide:Download PDF Thermal Performance:See detail Mechanical Drawing:See detail Links: FEATURES AND BENEFITS Thermal performance is at least 3x better than the exact same size fanSINK without the liquid loop. Integrated HEX, hence, the liquid loop may require one less component. Stainless steel screw fan attachment ensures dependable long-term fan to heat sink assembly. 4-40 thread screws are supplied in 4 lengths (1/2", 3/4", 7/8", 1"). Fan assembly hole pattern is 61.5 mm C-C (center to center) Screw PEM push pin attachment included Includes Thermal Interface Material (TIM) centered on base. Recommended through hole size in PCB is 3.00 mm Fluid Types: Water, Propylene Glycol, Refrigerants, Dielectrics, Mineral Oil, EG Mixtures Product DetailsATS LQHS 84000 Series Thermal Resistance With Orion Fan OD7020-12HHB10A Part Number Lifecycle Status Dimension (mm) TIM Finish Total Thermal Resistance(°C/W) Flow Rate LPM(GPM) 1.9(0.5) Flow Rate LPM(GPM) 3.7(1.0) Flow Rate LPM(GPM) 5.7(1.5) Flow Rate LPM(GPM) 7.6(2.0) Length Width Height R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) ATS-LQHS-84025-C1-R0 ACTIVE 84.0 84.0 25.8 Chomerics T766 Black 0.06 0.06 10.00 (1.45) 0.05 36.00 (5.22) 0.05 77.00 (11.17) 0.05 134.00 (19.43) Application Notes Thermal Performance Technical & Mechanical Data Thermal Performance Schematic Image Thermal Resistance Flow Rate LPM(GPM) R (°C/W) dP kPA (psi) *Image above is for illustration purpose only. 1.9 (0.5) 0.06 10.00 (1.45) 3.7 (1.0) 0.05 36.00 (5.22) 5.7 (1.5) 0.05 77.00 (11.17) 7.6 (2.0) 0.05 134.00 (19.43) ATS-LQHS-84025-C1-R0 (Data Sheet) ATS-LQHS-84025-C1-R0 Mechanical Drawing - FUSED MODEL (used for Form and Fit use) RoHS & REACH Certificate Complete Your Liquid Loop with ATS ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system. iCDM Cold Plates Vapor Compression Chillers Heat Exchangers TEC Heat and Chillers Flow Meters Leak Detectors Refrigeration Liquid Cooled Heat Sinks Fused Model Check Stock & Buy Now Data Sheet RoHS & REACH Certificate Custom Designs Available! Click Here to Contact Us Frequently Asked Questions ? View Similar ATS-LQHS-74025-C1-R0 ATS-LQHS-84030-C1-R0
Get Mechanical Drawing *Image above is for illustration purpose only.. ATS-LQHS-84025-C1-R0 Liquid Cooled Heat Sinks ATS Part#: ATS-LQHS-84025-C1-R0 Description: 84.00 x 84.00 Heat Sink in heights of 25.8mm High Performance Liquid Cooled fanSINK™ with Push Pin Attachment Heat Sink Type: fanSINK, liquid cooled, (fan not included) Installation Guide:Download PDF Thermal Performance:See detail Mechanical Drawing:See detail Links: FEATURES AND BENEFITS Thermal performance is at least 3x better than the exact same size fanSINK without the liquid loop. Integrated HEX, hence, the liquid loop may require one less component. Stainless steel screw fan attachment ensures dependable long-term fan to heat sink assembly. 4-40 thread screws are supplied in 4 lengths (1/2", 3/4", 7/8", 1"). Fan assembly hole pattern is 61.5 mm C-C (center to center) Screw PEM push pin attachment included Includes Thermal Interface Material (TIM) centered on base. Recommended through hole size in PCB is 3.00 mm Fluid Types: Water, Propylene Glycol, Refrigerants, Dielectrics, Mineral Oil, EG Mixtures Product DetailsATS LQHS 84000 Series Thermal Resistance With Orion Fan OD7020-12HHB10A Part Number Lifecycle Status Dimension (mm) TIM Finish Total Thermal Resistance(°C/W) Flow Rate LPM(GPM) 1.9(0.5) Flow Rate LPM(GPM) 3.7(1.0) Flow Rate LPM(GPM) 5.7(1.5) Flow Rate LPM(GPM) 7.6(2.0) Length Width Height R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) ATS-LQHS-84025-C1-R0 ACTIVE 84.0 84.0 25.8 Chomerics T766 Black 0.06 0.06 10.00 (1.45) 0.05 36.00 (5.22) 0.05 77.00 (11.17) 0.05 134.00 (19.43) Application Notes Thermal Performance Technical & Mechanical Data Thermal Performance Schematic Image Thermal Resistance Flow Rate LPM(GPM) R (°C/W) dP kPA (psi) *Image above is for illustration purpose only. 1.9 (0.5) 0.06 10.00 (1.45) 3.7 (1.0) 0.05 36.00 (5.22) 5.7 (1.5) 0.05 77.00 (11.17) 7.6 (2.0) 0.05 134.00 (19.43) ATS-LQHS-84025-C1-R0 (Data Sheet) ATS-LQHS-84025-C1-R0 Mechanical Drawing - FUSED MODEL (used for Form and Fit use) RoHS & REACH Certificate Complete Your Liquid Loop with ATS ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system. iCDM Cold Plates Vapor Compression Chillers Heat Exchangers TEC Heat and Chillers Flow Meters Leak Detectors Refrigeration Liquid Cooled Heat Sinks
Fused Model Check Stock & Buy Now Data Sheet RoHS & REACH Certificate Custom Designs Available! Click Here to Contact Us Frequently Asked Questions ? View Similar ATS-LQHS-74025-C1-R0 ATS-LQHS-84030-C1-R0
