Get Mechanical Drawing *Image above is for illustration purpose only.. ATS-TCP-1030 Tubed Cold Plates The Tubed Cold Plate family is engineered as a cost effective and reliable solution for thermal management applications where liquid cooling of components is preferred over air. The cold plates are manufactured in the USA using continuous copper or stainless steel tubing. The stainless steel tubing is secured between two base plates. The copper tubing uses a press-fit attachment method that maximizes heat transfer since the tubes are directly connected to the plate instead of through a bulky epoxy or other material that can act as thermal insulator. Check Stock & Buy Now Features & BenefitsCost-effective thermal management solution for component cooling where the heat load is low to moderateCompatible with industry accepted coolantsThe cold plate base is made of aluminum 6063Copper tubed cold plates feature a direct, press fit attachment method to provide superior heat transferStainless steel tubed cold plates feature stainless steel tubing (SS 304/316) secured between two platesSupplied with secure, 3/8" push-to-connect tube fittings for a tight connection between the cold plate and inlet and outlet tubing.Tube outer diameter is 3/8" (9.525 mm).Maximum pressure: 200 psiPlastic tubing connecting to our Cold Plate fitting has to be at least 90 durometer Shore A scaleApplicationsAutomotiveInstrumentsUninterruptible Power SuppliesWind TurbinesPhotovoltaic InvertersInduction HeatersMotor Devices Product Details Part Number Lifecycle Status Plate Dimension (mm) OverallLength(mm) # No of Tube Pass TubeMaterial Flow Rate LPM(GPM) 1.9(0.5) Flow Rate LPM(GPM) 3.7(1.0) Flow Rate LPM(GPM) 5.7(1.5) Flow Rate LPM(GPM) 7.6(2.0) Length Width Height R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) ATS-TCP-1030 ACTIVE 108.0 72.0 15.2 138 2 Copper 0.06 0.15 (0.02) 0.041 0.47 (0.07) 0.034 0.95 (0.14) 0.03 1.61 (0.23) Application Notes Thermal Performance Technical & Mechanical Data Thermal Performance Schematic Image Thermal Resistance Flow Rate LPM(GPM) R (°C/W) dP kPA (psi) *Image above is for illustration purpose only. 1.9 (0.5) 0.06 0.15 (0.02) 3.7 (1.0) 0.041 0.47 (0.07) 5.7 (1.5) 0.034 0.95 (0.14) 7.6 (2.0) 0.03 1.61 (0.23) ATS-TCP-1030 (Data Sheet) RoHS & REACH Certificate Complete Your Liquid Loop with ATS ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system. iCDM Cold Plates Vapor Compression Chillers Heat Exchangers TEC Heat and Chillers Flow Meters Leak Detectors Refrigeration Liquid Cooled Heat Sinks Data Sheet RoHS & REACH Certificate Custom Designs Available! Click Here to Contact Us Frequently Asked Questions ? View Similar ATS-TCP-1001 ATS-TCP-1023
Get Mechanical Drawing *Image above is for illustration purpose only.. ATS-TCP-1030 Tubed Cold Plates The Tubed Cold Plate family is engineered as a cost effective and reliable solution for thermal management applications where liquid cooling of components is preferred over air. The cold plates are manufactured in the USA using continuous copper or stainless steel tubing. The stainless steel tubing is secured between two base plates. The copper tubing uses a press-fit attachment method that maximizes heat transfer since the tubes are directly connected to the plate instead of through a bulky epoxy or other material that can act as thermal insulator. Check Stock & Buy Now Features & BenefitsCost-effective thermal management solution for component cooling where the heat load is low to moderateCompatible with industry accepted coolantsThe cold plate base is made of aluminum 6063Copper tubed cold plates feature a direct, press fit attachment method to provide superior heat transferStainless steel tubed cold plates feature stainless steel tubing (SS 304/316) secured between two platesSupplied with secure, 3/8" push-to-connect tube fittings for a tight connection between the cold plate and inlet and outlet tubing.Tube outer diameter is 3/8" (9.525 mm).Maximum pressure: 200 psiPlastic tubing connecting to our Cold Plate fitting has to be at least 90 durometer Shore A scaleApplicationsAutomotiveInstrumentsUninterruptible Power SuppliesWind TurbinesPhotovoltaic InvertersInduction HeatersMotor Devices Product Details Part Number Lifecycle Status Plate Dimension (mm) OverallLength(mm) # No of Tube Pass TubeMaterial Flow Rate LPM(GPM) 1.9(0.5) Flow Rate LPM(GPM) 3.7(1.0) Flow Rate LPM(GPM) 5.7(1.5) Flow Rate LPM(GPM) 7.6(2.0) Length Width Height R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) R (°C/W) dP kPA (psi) ATS-TCP-1030 ACTIVE 108.0 72.0 15.2 138 2 Copper 0.06 0.15 (0.02) 0.041 0.47 (0.07) 0.034 0.95 (0.14) 0.03 1.61 (0.23) Application Notes Thermal Performance Technical & Mechanical Data Thermal Performance Schematic Image Thermal Resistance Flow Rate LPM(GPM) R (°C/W) dP kPA (psi) *Image above is for illustration purpose only. 1.9 (0.5) 0.06 0.15 (0.02) 3.7 (1.0) 0.041 0.47 (0.07) 5.7 (1.5) 0.034 0.95 (0.14) 7.6 (2.0) 0.03 1.61 (0.23) ATS-TCP-1030 (Data Sheet) RoHS & REACH Certificate Complete Your Liquid Loop with ATS ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system. iCDM Cold Plates Vapor Compression Chillers Heat Exchangers TEC Heat and Chillers Flow Meters Leak Detectors Refrigeration Liquid Cooled Heat Sinks
Data Sheet RoHS & REACH Certificate Custom Designs Available! Click Here to Contact Us Frequently Asked Questions ? View Similar ATS-TCP-1001 ATS-TCP-1023
