ATS Products
*Image above is for illustration purpose only..
Cold Plates
  • ATS-CP-1004
  • Finned Cold Plate
  • Aluminum
  • Download PDF
  • See detail
  • See detail

ATS IGBT cold plates have unmatched thermal performance because of their mini-channel fin design.

The ATS-CP-1004 cold plate, at a flow rate of 4 L/min, can transfer 1kW of heat at 5.9°C temperature difference between the cold plate base and inlet fluid temperature. If the coolant has particles, a #60 filter or finer is recommended to remove possible particles in the liquid.

Customization is available. ATS can design cold plates to meet size restrictions and manufacture cold plates to connect with a variety of components include


  • Dimensions in mm (L x W x H): 162 x 172 x 20
  • Material: Aluminum (Unfinished)
  • Weight: 1,128 grams
  • More than 30% improvement in thermal performance compared to commercially-available cold plates
  • Compatible with industry accepted coolants
  • 1/4 (pipe size) – 18 (thread density) NPT threaded input and output
  • Low pressure drop characteristics
  • Lightweight for ease of use
  • Provides uniform cold plate surface temperature when IGBTs are installed
  • Maximum Pressure: 60 psi
  • Customizable to fit different devices
Product Details
Part Number Lifecycle
Plate Dimension (mm) Weight
Thermal Base on 1kW
& Flow Rate of 4 L / min
Length Width Height
ATS-CP-1004 ACTIVE 162.0 172.0 20.0 1,128 N/A Aluminum
Thermal Performance
Schematic Image Thermal Resistance
Flow Rate
kPA (psi)

*Image above is for illustration purpose only.
1.9(0.5) 5.9 0.00 (0.00)
3.7(1.0) 0 0.00 (0.00)
5.7(1.5) 0 0.00 (0.00)
7.6(2.0) 0 0.00 (0.00)
ATS-CP-1004    (Data Sheet)
download data sheet
Mechanical Drawing - FUSED MODEL (used for Form and Fit use)
download fused Model for Form and Fit use
RoHS & REACH Certificate download data sheet
Complete Your Liquid Loop with ATS

ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system.