Leak Detector | ATS-LD-20

Get Mechanical Drawing

*Image above is for illustration purpose only..

ATS-LD-20
Leak Detector

ATS Part#: ATS-LD-20
Description: 0.0 x 0.0 x 0.0 mm
Base Material:
Heat Sink Type:
Wick Type:
Tubing: Tubing:
Heat Sink Fin Type:
Heat Sink Hole Pattern:
Installation Guide:Download PDF
Thermal Performance:See detail
Mechanical Drawing:See detail

Features & Benefits

Automatic shut off when water leak is detected
Automatic shut off when battery power is low
Easy installation
Power: 9V battery
Model ATS-LD-20: “end of filter life” alert
Environmental temperature: 0–60℃

Applications

Water cooler
Water cooling loop
Water loop in a cold plate
Water dispenser
Laboratory testing
Industrial applications
Water filtration systems

Included Adapters

ATS046028-CF90-R0 ½ NPT male
ATS030026-CF91-R0 ½ BSPP

Product Details

L=Length (m);C=Temp Range (℃); Psi=pound-force per square inch;

Part Number	Lifecycle Status	Cable		Connection	Adapter	Temp Range	Max Pressure	Material	Special Feature
Part Number	Lifecycle Status	Length	Weight	Connection	Adapter	Temp Range	Max Pressure	Material	Special Feature
ATS-LD-20	ACTIVE	1.5 m (5 ft.)	176g (.4 lbs)	1/2" BSP MALE	ATS046028-CF90-R0 ATS030026-CF91-R0	0 – 60℃	6 Bar (87 Psi)	Plastic	Auto shut off when water leak is detected.

Specifications

Part Number	Lifecycle Status	Plate Dimension (mm)			Overall Length (mm)	# No of Tube Pass	Tube Material	Flow Rate LPM(GPM) 1.9(0.5)		Flow Rate LPM(GPM) 3.7(1.0)		Flow Rate LPM(GPM) 5.7(1.5)		Flow Rate LPM(GPM) 7.6(2.0)
Part Number	Lifecycle Status	Length	Width	Height	Overall Length (mm)	# No of Tube Pass	Tube Material	R (°C/W)	dP kPA (psi)	R (°C/W)	dP kPA (psi)	R (°C/W)	dP kPA (psi)	R (°C/W)	dP kPA (psi)
ATS-LD-20	ACTIVE	0.0	0.0	0.0	N/A	N/A

Notes
Thermal Performance
Technical & Mechanical Data

Thermal Performance

Schematic Image	Thermal Resistance
Schematic Image	Flow Rate LPM(GPM)	R (°C/W)	dP kPA (psi)
*Image above is for illustration purpose only.	1.9 (0.5)	0	N/A
	3.7 (1.0)
	5.7 (1.5)
	7.6 (2.0)

ATS-LD-20 (Data Sheet)
ATS-LD-20 CAD MODEL (Fused Model) - use for Form and Fit

Complete Your Liquid Loop with ATS

ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system.

ATS-LD-20