ATS Products

RoHS & REACH Certificate Fused Model Check Distribution Stock
Frequently Asked Questions ?
  • Cost effective thermal management solution for component cooling where the heat load is low to moderate
  • Compatible with industry accepted coolants
  • The cold plate base the copper tubes press into is made of aluminum 6063
  • Copper tubed cold plates are attached to the base plate with a thin film of high thermal conductivity epoxy for secure tube attachment.
  • Stainless steel tubed cold plates are SS 304/316 and feature tubing secured between two plates
  • Supplied with secure, 3/8“ push-to-connect tube fittings for a tight connection between the cold plate and inlet and outlet tubing. Tube outer diameter is 3/8“ (9.525 mm).
  • Maximum pressure: 200 psi
  • Plastic tubing connecting to our Cold Plate fitting has to be at least 90 durometer Shore A scale
Part Number Plate Dimension (mm) Overall
Length
(mm)
# No
of Tube
Pass
Tube
Material
Flow Rate
0.5 gpm
Flow Rate
1.0 gpm
Flow Rate
1.5 gpm
Flow Rate
2.0 gpm
Data Sheet RoHS & REACH
Length Width Height R
(°C/W)
dP
kPA (psi)
R
(°C/W)
dP
kPA (psi)
R
(°C/W)
dP
kPA (psi)
R
(°C/W)
dP
kPA (psi)
ATS-TCP-1021 152.0 191.0 15.0 229 6 Stainless Steel 0.021 3.57 (0.52) 0.018 9.22 (1.34) 0.017 18.33 (2.66) 0.016 29.33 (4.25) download data sheet
Thermal Performance
Schematic Image Cold Plate Thermal Resistanc
Flow Rate
(gpm)
R
(°C/W)
dP
kPA (psi)

*Image above is for illustration purpose only.
0.5 0.021 3.57 (0.52)
1.0 0.018 9.22 (1.34)
1.5 0.017 18.33 (2.66)
2.0 0.016 29.33 (4.25)
ATS-TCP-1021
download data sheet
ATS-TCP-1021
Mechanical Drawing - FUSED MODEL (used for Form and Fit use)
download fused Model for Form and Fit use
RoHS
Obtain RoHS Certificate
download data sheet