*Image above is for illustration purpose only.. ATS-HE23-C1-R0 Heat Exchanger - Without fan ATS tube-to-fin, liquid-to-air heat exchangers are made with the industry’s highest density fins to maximize heat transfer from liquid to air, allowing the liquid to be cooled to lower temperatures than other heat exchangers on the market. The heat exchanger fins and tubes are made of copper to be suitable for a variety of fluids, including water, dielectric fluids, and custom designed heat transfer fluids.Each of the eight heat exchanger sizes is available with or without a fan. ATS heat exchangers can be used in laser cooling, medical equipment and imaging devices, compressor cooling, semiconductor processing, HVAC, food and beverage processing, and other liquid cooling applications. Check Stock & Buy Now Features & Benefits Tube diameter: 0.375 and 0.5" Copper tubes Copper fins ATS special high-efficiency and high density fin design Silver-solder brazed jointsInternally cleaned and corrosion protected Externally coated for corrosion protection Assembled with fan Can be customized for different fans 100% pressure tested Maximum pressure: 100 psi Applications Automotive Aerospace Medical Laser Cooling Electronics Cooling Compressor Cooling Semiconductor Processing HVAC Product Details L=Length (inches);W=Width (inches); H=Height (inches);W=Weight (g);T=Thickness (mm); R=Thermal Resistance (°C/W); ΔT=Inlet liquid temperature - Inlet air temperature; Part Number Lifecycle Status Dimension (inches) Fan Size # No of Fans Heat Transfer Capacity Weight (g) Material Length Width Height ATS-HE23-C1-R0 ACTIVE 17.5 9.0 2.5 N/A N/A 117W per ΔT=1°C 7,000 Copper tubes, Copper fins Complete Your Liquid Loop with ATS ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system. iCDM Cold Plates Vapor Compression Chillers Heat Exchangers TEC Heat and Chillers Flow Meters Leak Detectors Refrigeration Liquid Cooled Heat Sinks Schemantic Image Fused Model Data Sheet RoHS & REACH Certificate Custom Designs Available! Click Here to Contact Us Frequently Asked Questions ? Download Portal View Similar ATS-HE-26 ATS-HE-23
*Image above is for illustration purpose only.. ATS-HE23-C1-R0 Heat Exchanger - Without fan ATS tube-to-fin, liquid-to-air heat exchangers are made with the industry’s highest density fins to maximize heat transfer from liquid to air, allowing the liquid to be cooled to lower temperatures than other heat exchangers on the market. The heat exchanger fins and tubes are made of copper to be suitable for a variety of fluids, including water, dielectric fluids, and custom designed heat transfer fluids.Each of the eight heat exchanger sizes is available with or without a fan. ATS heat exchangers can be used in laser cooling, medical equipment and imaging devices, compressor cooling, semiconductor processing, HVAC, food and beverage processing, and other liquid cooling applications. Check Stock & Buy Now Features & Benefits Tube diameter: 0.375 and 0.5" Copper tubes Copper fins ATS special high-efficiency and high density fin design Silver-solder brazed jointsInternally cleaned and corrosion protected Externally coated for corrosion protection Assembled with fan Can be customized for different fans 100% pressure tested Maximum pressure: 100 psi Applications Automotive Aerospace Medical Laser Cooling Electronics Cooling Compressor Cooling Semiconductor Processing HVAC Product Details L=Length (inches);W=Width (inches); H=Height (inches);W=Weight (g);T=Thickness (mm); R=Thermal Resistance (°C/W); ΔT=Inlet liquid temperature - Inlet air temperature; Part Number Lifecycle Status Dimension (inches) Fan Size # No of Fans Heat Transfer Capacity Weight (g) Material Length Width Height ATS-HE23-C1-R0 ACTIVE 17.5 9.0 2.5 N/A N/A 117W per ΔT=1°C 7,000 Copper tubes, Copper fins Complete Your Liquid Loop with ATS ATS has the products needed to design a complete liquid cooling loop : iCDMs (Industrial Cooling Distribution Modules), Tubed and High Performance Cold Plates to transfer and remove the heat from the source; Heat Exchangers to transfer heat from the liquid to the air with or without a fan; Chillers to circulate and condition the fluid in the system, Compact Refrigeration Modules for very high capacity cooling. In addition , ATS offers Flow Meters to measure the volumetric flow rate of the fluid in the system and Leak Detectors to notify users of any leaks in the system. iCDM Cold Plates Vapor Compression Chillers Heat Exchangers TEC Heat and Chillers Flow Meters Leak Detectors Refrigeration Liquid Cooled Heat Sinks
Schemantic Image Fused Model Data Sheet RoHS & REACH Certificate Custom Designs Available! Click Here to Contact Us Frequently Asked Questions ? Download Portal View Similar ATS-HE-26 ATS-HE-23
